SMARC-FiMX6 Computer on Module
10+ Years Product Life Cycle !!
Technical & Documents Support in the product tabs.
Electronics Attributes
Form Factor 82 mm x 50 mm by SMARC Specification
Compliance SMARC 1.0 _and_ SMARC 1.1 (same P/N)
Power Supply 3V to 5.25V
Power Consumption Solo Core (512MB DDR3L): 1.55W, Dual Lite Core (1GB DDR3L): 2.2W, Dual Core (1GB DDR3L): 2.5W, Quad Core (1GB DDR3L): 3.6W
Environment Attributes
Normal Temperature Normal Temperature: 0°C ~ 60°C
Industrial Temperature Industrial Temperature: -40°C ~ 85°C
Humidity 10% ~ 90% relative humidity, non-condensed

Write a review

Note: HTML is not translated!
    Bad           Good
Please go to Embedian Development Site for how to configure, build and install all software packages.
Yocto Project can go to Building TI/Embedian's Arago SDK Distribution for more details.
It is recommended to read our FAQs during development. 

SMARC-FiMX6 Computer on Module


◆ NXP (Freescale) i.MX 6 Cortex-A9 Solo, Dual-Lite, Dual

    and Quad, 1GHz (Industrial Temp.:800MHz) 

◆ 1GB DDR3L (2GB Option, Solo=512MB),

    8GB eMMC Flash, 1x SD/MMC, 1x SATA (D/Q)

◆ Parallel 18/24-bit RGB, 24-bit dual-chann. LVDS, HDMI

◆ 1 x 10/100/1000Mbps LAN

◆ 2 x CAN, 4 x UART, 5 x I2C, 2 x I2S, 1 x PCIe,

    12 x GPIOs, 2 x SPI, 4-LANE Serial Camera Interface

◆ Model Description:

  • SMARC-FiMX6-S: Solo Core, 512MB DDR3L, 1.8V and 3.3V VDDIO
  • SMARC-FiMX6-U-1G: DualLite Core, 1GB DDR3L, 1.8V and 3.3V VDDIO (+$13.0)
  • SMARC-FiMX6-D-1G: Dual Core, 1GB DDR3L, 1.8V and 3.3V VDDIO (+$24.0)
  • SMARC-FiMX6-Q-1G: Quad Core, 1GB DDR3L, 1.8V and 3.3V VDDIO (+$32.0)
  • SMARC-FiMX6-D-2G: Dual Core, 2GB DDR3L, 1.8V and 3.3V VDDIO (+$36.0)
  • SMARC-FiMX6-Q-2G: Quad Core, 2GB DDR3L, 1.8V and 3.3V VDDIO (+$44.0)
  • SMARC-FiMX6-S-I: Solo Core, 512MB DDR3L,  industrial temp.(+$30.0)
  • SMARC-FiMX6-S-I-C: Solo Core, 512MB DDR3L, 1.8V and 3.3V VDDIO, industrial temp., conformal coating(+$37.0)
  • SMARC-FiMX6-Q-1G-I: Quad Core, 1GB DDR3L, 1.8V and 3.3V VDDIO, industrial temp., conformal coating(+$62.0)
  • SMARC-FiMX6-Q-1G-I-C: Quad Core, 1GB DDR3L, 1.8V and 3.3V VDDIO, industrial temp., conformal coating(+$69.0)

※ Evaluation Baseboard: EVK-STD-CARRIER

Datasheet download
Technical Information:

 NXP (Freescale) i.MX 6

 Solo, Dual Lite, Dual and Quad Core

 ARM Cortex-A9, 1GHz (Industrial Temp.: 800Mhz)


 1GB DDRL (Dual Lite, Dual and Quad)

 or 2GB DDR3L (Dual and Quad only)

 512MB DDR3 (Solo)

 8GB eMMC (5.0) onboard

 4MB SPI NOR Flash onboard

 AT24C32 EEPROM onboard

Graphic Controller

 Dual Display

 HD 1080p Encode/Decode

 2D/3D h/w Acceleration

Display Interfaces

 24 bit parallel RGB LCD data and control signals

 Single channel 18 or 24 bit LVDS LCD

 or dual channel LVDS LCD

  • Panel support signals (I2C, Power Enables, PWM)
  • 2nd LVDS channel may be implemented on Carrier board
  • Support for dual channel implementations

 One HDMI Port

MIPI/ Serial Camera Interfaces Serial configuration: CSI (4 lanes)
SDIO Interfaces

 Two SDIO interfaces

  • 4 bit SDIO card interface with support lines
  • 8 bit eMMC interface with support lines
SPI Interfaces Two SPI interfaces
I2S Interfaces

 One I2S interface

  • Typically used for connection to I2S audio CODECs

SPDIF Interfaces

 One SPDIF interface

  • SPDIF_IN and SPDIF_OUT available for audio use
I2C Interfaces

 Four I2C interfaces

  • Power Management
  • General Purpose
  • Camera
  • LCD Display ID

HDMI interface also has private I2C interface for HDMI use

Asynchronous Serial Port (UART) Interfaces

 Four asynchronous serial ports

 Two with 4 wire handshake (RXD, TXD, RTS#, CTS#)

 Two with data only (RXD, TXD)

 Logic level signals

CAN Bus Interfaces

 Two CAN bus interfaces

  • Logic level signals from Module based CAN bus protocol controllers
  • RXD, TXD only
  • Two Module GPIOs are designated for optional use as CAN bus error status inputs
USB Interfaces

Two USB Ports allow USB 2.0 Host operation (Full  Speed and High Speed)

One port allows USB 2.0 OTG (USB client or host)

USB support signals (VBUS enable / Over-current detects, OTG support signals)

PCI Express

One PCIe x 1 link

PCIe Gen2

Reference Clock Pair

Full set of PCIe support signals (CLKREQ#, PCIE_RESET#, presence detects)

Could be configured as PCIe target

Common PCIe wake signal
SATA Interface (Dual and Quad core only)

 One SATA interface

 SATA Gen2

Gigabit Ethernet

One analog GBE MDI interface (Qualcomm Atheros AR8035 PHY onboard)

No magnetics on Module

LED support signals

CTREF (center tap reference voltage) for Carrier magnetic

Watchdog Timer

Real-Time Clock

 External Seiko S35390A onboard
General Purpose I/O

 Twelve GPIO signals

 Specific alternate functions are assigned to some GPIOs

 PWM / Tachometer capability

 Camera support

 CAN Error Signaling

 HD Audio reset

System and Power Management Signals

 Reset out and Reset in

 Power button in

 Power source status

 Module power state status

 System management pins

 Battery and battery charger management pins

 Carrier Power On control

Boot Source Select

 Three pins to allow selection from Carrier Board

 Select options to include boot from one of the following:

  • Module SPI
  • Module eMMC Flash
  • Module NOR Flash
  • Module Remote Boot (Network Port)
  • Carrier SPI
  • Carrier eMMC
  • Carrier SD Card
  • Carrier SATA

Power Supply

3V to 5.25V

Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply
Power Consumption (Typical)

 Solo Core (512MB DDR3L): 1.55W

 Dual Lite Core (1GB DDR3L): 2.2W

 Dual Core (1GB DDR3L): 2.5W

 Quad Core (1GB DDR3L): 3.6W


Linux and Android:

Based on NXP (Freescale) imx_4.9.88_2.0.0_ga, imx_4.9.11_1.0.0_ga, imx_4.1.15_1.0.0_ga and imx_3.14.28_1.0.0_ga

Yocto Project Support

Ubuntu 14.04/16.04 and Debian 9 Support

Android 7.1.2_2.0.0 (Nougat) and Android 6.0.1_2.1.0 (Marshmallow) Support


The estimated lead time will be 5 ~10 days. For detailed lead time, please contact us.

  • Views: 9362
  • Brand: embedian
  • Product Code: SMARC-FimX6
  • Availability: In Stock
  • $88.0
  • 10 or more $85.0
  • 50 or more $82.0
  • 200 or more $80.0
  • 500 or more $78.0

Available Options

Tags: embedded-computer-on-module

Features:◆ SMARC Module 1.0 and 1.1 Compliant◆ SMARC module bring-up platform for hardware..
Features:◆ TI Sitara AM4378 @800MHz or 1GHz◆ 512MB or 1GB DDR3L◆ 4GB eMMC Flash◆ ..
Features:515nm / 520nm Green Line Laser ModuleDimension Siz: D9mm x 36mmVoltage: 2.7~5VDCOutput Powe..
$60.0 $50.0
Features:515nm Small Green Laser ModuleDimension Size: D4.5mm x 8mm(without PCBA)Voltage: 2.7~5VDCOu..
$60.0 $50.0
Features:515nm standard small green laser moduleDimension Size: D6mm x 28mm(with PCBA)Voltage: 2.7~5..
$50.0 $45.0
Features:635nm Standard Small Laser ModuleDimension Size: D4mm x 18mmVoltage: 3VDCOutput Power: 1mW,..
$20.0 $16.0
Features:808nm Infrared Laser Line ModuleDimension Size: D9mm x 25mmVoltage: 3VDCOutput Power: 30mW,..
$14.0 $12.0
Features:850nm Infrared Laser ModuleDimension Size: D6mm x 10mm(without PCBA)Voltage: 3VDCOutput Pow..
$13.0 $12.0