Menu
Your Cart

SMARC-FiMX6 Computer on Module

SMARC-FiMX6 Computer on Module

10+ Years Product Life Cycle !!                    

The highly scalable SMARC-FiMX6 modules with single, dual lite, dual or quad core NXP(Freescale) i.MX6 processors cover an extremely wide performance range. Based on the ARM Cortex A9 technology, they support a huge variety of industry standard interfaces, while at the same time providing advanced multimedia and high speed connectivity making it suitable for an almost unlimited number of applications.
SMARC-FiMX6 supports both SMARC 1.0 AND SMARC 1.1 standards.

Features :

  • Freescale i.MX6 Cortex-A9 Solo, Dual-Lite, Dual and Quad 1GHz
  • 1GB DDR3L (2GB Option, Solo=512MB), 8GB eMMC Flash, 1x SD/MMC, 1x SATA (D/Q)
  • Parallel 18/24-bit RGB, 24-bit dual-chann. LVDS, HDMI
  • 1 x 10/100/1000Mbps LAN
  • 2 x CAN, 4 x UART, 5 x I2C, 2 x I2S, 1 x PCIe, 12 x GPIOs, 2 x SPI, 4-LANE Serial Camera Interface

Datasheet :


  Applications :

  • Human Machine Interface (HMI)
  • Rear Seat Entertainment Systems
  • In-Freight Entertainment
  • The Internet of Things (IOT)
  • Medical-CT Scanner
  • Digital Signage
  • Point of Sales
  • Display Units
  • General Control Systems
  • Smart Grid
  • HVAC Control System

Development Evaluation Kit :

The Evaluation Carrier Board is available: SMARC1.x EVK-STD-CARRIER Standard Evaluation Board


Technical resources :

Configure, build and install all software packages : Embedian Development Site

Building by Yocto Project : Building Freescale/Embedian's Yocto BSP Distribution

Building by Android : Building Freescale/Embedian's Android BSP Distribution

It is recommended to read our FAQs during development. 


Documents :

 SMARC-FiMX6 Users' Manual (v1.2)

 SMARC Heat Sink (VTT-HS-8J064) Datasheet 

 SMARC-FiMX6 ROHS 2.0 Compliance Assessment Report

 SMARC-FiMX6 ROHS 1.0 Compliance Assessment Report

 SMARC Evaluation Carrier Board EVK-STD-CARRIER Users’ Manual (for Hardware Rev. 00B0)

 SMARC Carrier Board Reference Schematics (EVK-STD-CARRIER Rev. 00B0)

 SMARC-FiMX6 Solo/DualLite core IOMUX File

 SMARC-FiMX6 Dual/Quad core IOMUX File

 SMARC-FiMX6 Bootup Log (Ubuntu 14.04)

 SMARC-FiMX6 Bootup Log (Yocto QT5 BSP)


Note:

The estimated lead time will be 5 ~10 days. For detailed lead time, please contact us.

Technical Information
Compliance SMARC 1.0
SMARC 1.1
Dimension 82 mm x 50 mm by SMARC Specification
CPU NXP (Freescale) i.MX 6
Solo, Dual Lite, Dual and Quad Core
1GHz (Industrial Temp.: 800Mhz)
GPU Dual Display
HD 1080p Encode/Decode
2D/3D h/w Acceleration
Memory 1GB DDRL (Dual Lite, Dual and Quad)
2GB DDR3L (Dual and Quad only)
512MB DDR3 (Solo)
8GB eMMC (5.0) onboard
4MB SPI NOR Flash onboard
AT24C32 EEPROM onboard
Display Interfaces 24 bit parallel RGB LCD data and control signals
Single channel 18 or 24 bit LVDS LCD or dual channel LVDS LCD
● Panel support signals (I2C, Power Enables, PWM)
● 2nd LVDS channel may be implemented on Carrier board
● Support for dual channel implementations
One HDMI port
MIPI-CSI Camera Interfaces Serial configuration: CSI (4 lanes)
SDIO Interfaces Two SDIO interfaces:
● 4 bit SDIO card interface with support lines
● 8 bit eMMC interface with support lines
SPI Interfaces Two SPI interfaces
I2S Interfaces One I2S interface:
● Typically used for connection to I2S audio CODECs
I2C Interfaces Four I2C interfaces:
● Power Management
● General Purpose
● Camera
● LCD Display ID
HDMI interface also has private I2C interface for
HDMI use
UART Interfaces Four asynchronous serial ports:
● Two with 4 wire handshake (RXD, TXD, RTS#, CTS#)
● Two with data only (RXD, TXD)
Logic level signals
CAN Bus Interfaces Two CAN bus interfaces:
● Logic level signals from Module based CAN bus protocol controllers
● RXD, TXD only
● Two Module GPIOs are designated for optional use as CAN bus error status inputs
USB Interfaces Two USB Ports allow USB 2.0 Host operation (Full Speed and High Speed)
One port allows USB 2.0 OTG (USB client or host)
USB support signals (VBUS enable / Over-current detects, OTG support signals)
SATA Interface *Dual and Quad core only One SATA interface:
● SATA Gen2
SPDIF Interfaces One SPDIF interface:
● SPDIF_IN and SPDIF_OUT available for audio use
PCI Express One PCIe x 1 link
PCIe Gen2
Reference Clock Pair
Full set of PCIe support signals (CLKREQ#, PCIE_RESET#, presence detects)
Could be configured as PCIe target
Common PCIe wake signal
Gigabit Ethernet One analog GBE MDI interface (Qualcomm Atheros AR8035 PHY onboard)
No magnetics on Module
LED support signals
CTREF (center tap reference voltage) for Carrier magnetic
Watchdog Timer Interfaces Standard Linux Watchdog API available.
Real-Time Clock External Seiko S35390A onboard
General Purpose I/O Twelve GPIO signals
Specific alternate functions are assigned to some GPIOs
PWM / Tachometer capability
Camera support
CAN Error Signaling
HD Audio reset
System and Power Management Signals Reset out and Reset in
Power button in
Power source status
Module power state status
System management pins
Battery and battery charger management pins
Carrier Power On control
Boot Source Select Three pins to allow selection from Carrier Board
Select options to include boot from one of the following:
● Module SPI
● Module eMMC Flash
● Module NOR Flash
● Module Remote Boot (Network Port)
● Carrier SPI
● Carrier eMMC
● Carrier SD Card
● Carrier SATA
Software
Linux and Android Based on NXP (Freescale) imx_4.14.98_2.0.0_ga, imx_4.9.88_2.0.0_ga, imx_4.9.11_1.0.0_ga, imx_4.1.15_1.0.0_ga and imx_3.14.28_1.0.0_ga
Yocto Project Support
Ubuntu 14.04/16.04 and Debian 9 Support
Android 7.1.2_2.0.0 (Nougat) and Android 6.0.1_2.1.0 (Marshmallow) Support
Power
Power Supply 3V to 5.25V
Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply
Power Consumption Solo Core (512MB DDR3L): 1.55W
Dual Lite Core (1GB DDR3L): 2.2W
Dual Core (1GB DDR3L): 2.5W
Quad Core (1GB DDR3L): 3.6W
Environment Attributes
Temperature Commercial Temperature: 0°C ~ 60°C
Industrial Temperature: -40°C ~ 85°C
Humidity 10% ~ 90% relative humidity, non-condensed
SMARC-FiMX6 Computer on Module
Starting From $113.0
  • Deliver Time: Available, 7~21 Days
  • Product ID: SMARC-FiMX6

Available Options

Reset options
Note:

We also support custom made service as your requirements.

For more details, please contact us.