Menu
Your Cart

SMARC2.0 EVK-STD-CARRIER-S20 Evaluation Carrier Board

SMARC2.0 EVK-STD-CARRIER-S20 Evaluation Carrier Board
SMARC2.0 EVK-STD-CARRIER-S20 Evaluation Carrier Board
SMARC2.0 EVK-STD-CARRIER-S20 Evaluation Carrier Board
SMARC2.0 EVK-STD-CARRIER-S20 Evaluation Carrier Board

10+ Years Product Life Cycle !!               

EVK-STD-CARRIER-S20 is a full function evaluation carrier board designed for standard SMARC 2.0 compliant modules. It supports all interfaces and signals that are defined in SMARC 2.0 specification. EVK-STD-CARRIER-S20 serves as an universal evaluation and starter kit for SMARC 2.0 computer on module. Use it to quickly turn your SMARC 2.0 modules into fully working device for hardware and software development.
Beside that, it enable early validation of the interfaces that needed in your carrier design. Beyond this, it facilitates early application development for carrier board designs and production testing. Further in the product cycle, it acts as a reference platform to help root-cause any incompatibilities between the SMARC 2.0 module and carrier board.

Features :

  • SMARC v2.0 Module Compliant
  • SMARC v2.0 module bring-up platform for hardware and software development.
  • SMARC v2.0 module validation platform
  • Customer evaluation platform
  • Customer carrier design reference
  • Technical supports in higher priority from IADIY

Datasheet :

  Applications :

  • Flexible prototyping vehicle
  • Manufacturing test platform.
  • An "application ready" single board computer. (together with SMARC module)


Package List :

  • 1 x EVT-STD-CARRIER-S20 carrier board
  • 4 x M2.5 screws
  • 1 x 16GB SDHC card with image pre-installed
  • 1 x LVDS cable
  • 1 x LVDS LCD Backlight cable
  • 1 x 12V/3A Power Supply
  • 1 x SATA Power cable
  • 1 x 10-way box header to DB9 cable

Compatible products :

Documents :

 EVK-STD-CARRIER-S20 SMARC 2.0 Evaluation Carrier User’s Manual

 SMARC 2.0 Carrier Board Reference Schematics (EVK-STD-CARRIER-S20 Rev. 00A0)


Note:

*Evaluation Board can only be sold with SMARC Module.

*The estimated lead time will be 5 ~10 days. For detailed lead time, please contact us.

Technical Information
Evaluation Baseboard Features DC +12V ~ +24V Power input with 2.5mm DC Jack
Accept 1.8V VDDIO SMARC 2.0 compliant module
LVDS LCD backlight control signals
RTC backup battery holder
Buzzer
single/dual-channel LVDS, HDMI and DisplayPort
2 x 10/100/1000Mbps RJ-45 connectors with magnets
2 x USB 2.0 host type A connectors, 2 x USB 3.0 host type A connectors, 1 x mini USB client connector
2 x CAN BUS headers
4 x RS232 (Two with DB9 can be configured as RS422/485, two with headers)
1 x 2x7-pin GPIO header
Audio microphone and headphone connector
3 x I2C headers (for capacitive touch),
2 x SPI headers and 2 x ESPI headers
1 x SDHC connector
1 x SATA Connector
2-LANE and 4-LANE CAMERA interfaces for camera moduled
1 x PCIex4 and 2 x mini-PCIe Connectors
A single 4KB EEPROM is provided on I2C0 that holds the board information. This information includes board name, serial number, and revision information.
1 x external watchdog reset
jumpers and switches for LCD 3.3V or 5V voltage, boot selection, RS232 or RS485 selection, GPIO and USB path selection
Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)
SMARC2.0 EVK-STD-CARRIER-S20 Evaluation Carrier Board
Based on 0 reviews. - Write a review
Starting From $609.0
  • Deliver Time: Available, 7~21 Days
  • Product ID: EVK-STD-CARRIER-S20

Available Options

Reset options
Add to Cart
Buy Now Contact us
Add to Wish List Compare this Product
Note:

We also support custom made service as your requirements.

For more details, please contact us.

Tags: embedded-computer-on-module